What size refrigerators work with the fridge slide?
The main fridges we recommend are the Dometic CFX 35W and CFX5 45L. Other fridges may be compatible—the opening for the slide is roughly 27″ × 16.1″.
Where do the fridge straps tie down to?
The fridge slide has strap points cut into the slide plate faces to ensure rigid mounting and avoid rattle.
Is there routing for fridge slide cable management, front and rear?
No cable management is included, but contact our team for help installing or recommendations.
How much does the Ford Bronco drawer system weigh?
Ford Bronco MOD‑01: 110 lbs, MOD‑02: 99 lbs, MOD‑03: 135 lbs.
What’s the total height of the system from the floor to the top of the drawers?
No drawer stacked will be roughly 12.25″ high, while one small drawer stacked on top leads to a system height of 20.5″. If you’d like more pictures or measurements, just give us a call.
Can you stack drawers on top of this system?
All drawers are vertically stackable. Most drawers can be stacked horizontally as well.
Will the drawer system rattle?
The Ford Bronco & Jeep Wrangler drawer systems use precision‑machined components and apply anti‑flocking felt tape at contact points to ensure a secure, rattle‑free assembly.
Are other low‑profile fridges compatible?
These systems only come with a fridge slide. The Dometic CD‑30 drawer fridge seen in the FJ 80 is not compatible with Bronco & Wrangler units.
How many dividers come with each drawer?
Three dividers are included in the longer drawers and two dividers in the shallower drawers (top left drawer in the MOD‑01 variation).
Can I buy extra dividers if needed?
Additional drawer dividers are available on our site. Contact our team if you encounter any fitment issues.
How many divider slots are there?
The longer drawers have 4 slots, and the shallower drawers have 3 slots (top left drawer in the MOD‑01 variation).
Can I run the drawers without the base plate?
Yes, our drawers can be installed into DIY base plates—such as wood with insert nuts. For hardware or advice, contact our team.
Is the system easy to remove?
Remove the bottom drawer closest to the base plate (4–6 bolts per side), then two handle bolts, and finally the mounting bolts securing to your plate. Lift out the unit; total time is about 30–40 minutes, ideally two people.
What’s the max load capacity of each drawer?
All Bronco & Wrangler drawers use genuine Accuride heavy‑duty slides rated up to 250 lbs.
Do you offer a bare aluminum option?
Every order ships powder‑coated. If you’d like raw aluminum, please contact us before ordering to discuss options.
How does the base plate system mount?
No drilling is required for Ford Bronco & Jeep Wrangler installations.
Can the sleeper add‑on be installed or removed on the fly? How long does it take?
The Sleeper Platform comes partially preassembled. To install, remove the drawer’s back panel, slide the drawer out, align the bracket inside, and secure the hinge plate to the drawer’s outer face. Installation takes about under an hour.